Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Colton, CA
We provide independent KraftMaid installation, repair, and refacing across Colton, and the thing that sets our work apart here is simple: we know how these cabinets actually age in mid-century stucco homes baked by Inland Empire sun. From delaminating doors on west-facing kitchen runs to drawer boxes racking against walls that haven’t been plumb since Eisenhower was president, we’ve seen it and fixed it. Call (855) 382-0824 for a free estimate, and we’ll walk you through what your KraftMaid kitchen actually needs.
Why Colton Residents Choose Us for KraftMaid Service
We’re not KraftMaid specialists. We’re the crew that gets called in when the original install starts to fail, the doors stop shutting flat, or the finish has gone chalky from years of Colton heat. Noel Garrity started Key Step Construction with a bias toward doing the boring things right: re-anchoring boxes to out-of-plumb framing, shimming drawer glides so they actually glide, and matching replacement hardware that isn’t going to sag in eighteen months. KraftMaid makes a solid cabinet box. The problems we see in Colton are almost always environmental: sun, heat, wind-driven grit, and houses that have settled in ways no cabinet was ever designed to absorb. We fix the cabinet and the conditions around it, because fixing one without the other just means you’ll call us again in three years.
We stock genuine KraftMaid hinges, glides, and drawer fronts for current production lines, and we’ve built a local parts network for the Vantage, Momentum, and Marquis series that keeps wait times down. When OEM parts are discontinued or on long factory lead times, we’ll tell you straight and match a quality aftermarket soft-close option that holds up. And we work as a full-scope contractor, which matters when your kitchen needs more than cabinet work: floor leveling, drywall repair, electrical for new lighting, even a window swap if the west-facing sun is the root of your problem. One contractor. Every system.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Solve in Colton
- Thermofoil and laminate-wrapped doors peeling at the edges. This is the number one KraftMaid failure we see in Colton, and it almost always hits kitchens with west or south-facing windows that catch the full afternoon sun. The adhesive layer under thermofoil breaks down in sustained heat, and the door edges start lifting and discoloring. We replace the affected doors with painted maple or glazed options that handle Inland Empire sun far better than wrapped finishes.
- Drawer boxes loosening and racking on out-of-plumb walls. Colton’s mid-century homes have settled over decades, and the 1950s-70s stucco tracts near downtown rarely have a truly plumb wall anymore. KraftMaid boxes screwed to framing that’s off by a quarter inch will eventually rack, the joints loosen, and drawers start rubbing and catching. We re-shim, re-anchor, and often rebuild the drawer box corners before anything else.
- Painted maple and glazed finishes yellowing or checking near heat sources. Hot, dry summers already stress cabinet finishes, but it’s the kitchens with undersized or missing vent hoods where we see the worst checking and discoloration, especially on the cabinet faces flanking the range or the dishwasher return. We address the finish and, where needed, talk through ventilation upgrades as part of the project.
- Soft-close hinges and drawer glides failing on older KraftMaid runs. The early soft-close hardware KraftMaid used was good but not immortal. In Colton kitchens that see big temperature swings between a hot afternoon and a cool evening, those hinge springs and glide dampeners wear out faster than they should.
- Sagging shelves under heavy cookware loads. KraftMaid’s adjustable shelves are strong, but years of cast-iron pots and stacked stoneware will bow them, especially on the wider Vantage and Momentum base cabinets. We reinforce or replace the shelf pins and, in serious cases, upgrade to thicker shelf stock matched to the original finish.
KraftMaid Service in Colton: What Local Conditions Mean for Your Project
Here’s the thing about Colton that most cabinet contractors miss: this city sits at the base of the San Bernardino Mountains with the Santa Ana River running along its edge, and the same conditions that stress foundations and drainage in older homes near the river and the slopes also work their way into your kitchen. We’re not just talking about heat. It’s the combination: hot, dry summers with intense sun, periodic Santa Ana winds that drive fine grit into every exterior seal, and a rainy season that reveals exactly which walls and floors have been moving for decades. Near the Colton Crossing, where the BNSF and UP rail lines intersect, the vibration from rail traffic adds another layer of settling that shows up as doors that no longer line up. In the mid-century housing stock of Colton, a KraftMaid repair in Loma Linda or nearby starts with kitchens hung on walls that have since drifted, cooked, and settled. That’s why our KraftMaid work here so often pairs cabinet refacing or repair with correcting the out-of-level floor or wall the original boxes were anchored to. A neighboring city like Redlands or Loma Linda has different soil conditions and less rail vibration; the problems are similar but the causes aren’t. Colton is its own animal, and cabinet work here has to account for that or it fails again.
KraftMaid Models & Products We Service in Colton
We work on the full KraftMaid lineup you’re likely to find in Colton kitchens: the Vantage series in oak and maple, the Momentum series with its full-overlay door styles, the Marquis series for more traditional profiles, and the semi-custom painted and glazed maple lines that became standard in builder-grade remodels through the 90s and 2000s. When a door front or drawer front needs replacement, we order genuine KraftMaid components when the line is still supported, matched to the original species, finish, and door profile. When KraftMaid has discontinued a finish or the lead time is unreasonable, we work with high-quality aftermarket suppliers who can match solid maple or oak doors and apply a finish that sits naturally alongside the originals. We keep common replacement hardware in our Colton job trailer: soft-close hinges, drawer glides, shelf pins, and touch-up kits for the finishes we see most often. That means less waiting on a factory shipment and more time actually getting your kitchen back in order.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Colton
Pricing for KraftMaid work in Colton breaks down by the scope of what we’re doing. A simple hinge-and-glide replacement on an existing kitchen lands at the low end. Refacing every door and drawer front, re-anchoring the boxes, and swapping in new hardware runs the full range depending on door count and finish selection. A full kitchen remodel with new KraftMaid cabinets, countertops, backsplash, and the necessary floor or wall corrections lands in the $14,000 to $45,000 range. Here’s the line-item breakdown:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
Every free estimate includes a written line-item quote. If your floor is out of level or the existing boxes are water-damaged, we’ll tell you before you spend a dollar, because a quote that ignores the conditions is a quote you shouldn’t trust. Call (855) 382-0824 for an exact number on your kitchen.
Serving Colton, CA - Our Local Coverage Area
We serve Colton and nearby communities. Also see KraftMaid in Grand Terrace. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Colton
No. Key Step Construction is an independent contractor, not a KraftMaid dealer or manufacturer-authorized service provider. We install, repair, and reface KraftMaid cabinetry as a third-party full-scope general contractor. That independence means our recommendations about repair versus replacement are based on what’s best for your kitchen, not on moving boxes through a dealership quota. Call (855) 382-0824 and we’ll give you the same honest read we’d give our own family.
Peeling doors are almost always a door-front problem, not a box problem. If the cabinet boxes are sound and the frames are still tight, we replace the affected doors with painted maple or glazed solid options, swap in fresh hardware, and you avoid a full gut. If the boxes themselves are water-damaged or the face frames have separated, refacing won’t save them and replacement becomes the smarter spend. We’ll tell you which camp your kitchen falls into before quoting anything.
Yes, and not in the way most people expect. Direct afternoon sun through west-facing windows breaks down the adhesive in thermofoil doors, which is why so many homes in mid-century Colton tracts have peeling cabinet edges on one side of the kitchen but not the other. Santa Ana winds carry fine grit that works into drawer glides and hinge mechanisms when windows are left open seasonally. The right door material and hardware choice can eliminate most of it. Call (855) 382-0824 for a free assessment of what your kitchen is up against.
Yes, and we’d argue it’s exactly why you’d want a full-scope contractor on the job. Highgrove KraftMaid service starts with the same principle: cabinets need a level, plumb wall to function properly over the long term. In Colton’s older homes, that often means shimming the runs, re-anchoring to solid blocking, or addressing floor issues before the cabinets go in. We handle the floor and wall corrections as part of the same contract, so the cabinets go in square and stay square.
If your KraftMaid boxes are solid, facing doors and drawers aren’t water-damaged, and the layout still works for how you cook, refacing plus new hardware and countertops usually gets you 80% of the transformation for half the cost of a full remodel. If the boxes have failed, the layout fights you daily, or the floor beneath the cabinets is moving, a full remodel is the better spend. We’ll walk the kitchen with you and give a straight recommendation. Call (855) 382-0824 to schedule that walkthrough – estimates are free.
Service Areas Near Colton
Key Step Construction serves Colton and the surrounding Inland Empire, including KraftMaid service in Meadowbrook and KraftMaid service in March Air Force Base. We also work across Colton service area ZIP 92324 and the nearby communities. If you’re in San Bernardino, Grand Terrace, or Loma Linda, reach out and we’ll confirm scheduling.
Book Your KraftMaid Service in Colton Today
If your KraftMaid kitchen is peeling, racking, or sagging, don’t wait for the damage to spread. Plan it right the first time and the walls take care of the rest. Call (855) 382-0824 to schedule your free KraftMaid cabinet estimate in Colton.
Written by Noel Garrity, Owner at Key Step Construction, serving Colton and the Inland Empire.